Jump to content
Mathew Steel

Connecting a SATA drive to an ATA connector!

Recommended Posts

If you have been, or are in, a situation like myself, then you'll notice there aren't a lot of options. I refer to connecting an SATA drive to an ATA connector. A lot of PC motherboards use ATA connectors over SATA. Now there is actually an easy fix.

 

I introduce, the SATAPOW. It's simple. It comes with a SATA 22-pin (although you can get different ones), with a power cable (10-inch or 18-inch) as well as a female ATA connector. Simply connect the SATA connector, connect the two ATA connections and connect the power cord to a SATA 2/3 slot and voila! Power!

 

The device costs about ?5-?12 depending on how long the power cord you choose is. Although, I warn you, the 10-inch one is going to be cutting it short for a lot of PC towers. Just to be safe, and save you paying for two devices, I'd go for the 18-inch.

 

You can buy the devices from Amazon, SCAN, or from the StarTech website (http://www.startech.com/).

 

cable-de-datos-slimline-sata-alim-molex-4pin-02-m.jpg

 

 

Regardless of what you may think, if you are using an SSD, it will not affect the speed. The device supports speeds of up to 6.0Gb/s. I have this device myself and so I can definitely tell you this is a fact!

 

 

Hopefully this was quick and easy to understand, and if you weren't looking for this sort of device, hopefully it made an interesting read. I wanted to share it with you, since there aren't many devices like this, for a 3.0Gb/s or 6.0Gb/s SATA drive.


"Gofyn wyf am galon hapus, calon onest, calon l?n."

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...